1Connect the board
Plug the board into this computer with a USB data cable, then click Connect and choose the port (usually "USB Serial", "CP210x" or "CH340").
Board not in the list? Try another cable or USB port. The computer may need the USB driver (CH340 or CP2102); ask Woodwhiz Toys.
2Install firmware
Installs the latest software on the board. Licence and settings on the board are kept.
Device ID (needed for licence activation):
3Device report
Reads the board's software version and saved settings (about 1 minute) and sends them to Woodwhiz Toys. It does not change anything on the board. The report includes the board's saved Wi-Fi settings, so it is only sent to Woodwhiz Toys.
4Live log
Records what the board is doing while it runs normally, for example while the screen is showing the Health Monitor page. Start it, leave it running until the problem happens (up to 60 minutes), then click Stop and send.
Message for Woodwhiz Toys (optional)
Your name, place, and what happened. Sent together with a report or log.